Jeff Bridgman Antique Flags
Sold Flags



  38 STAR ANTIQUE AMERICAN FLAG WITH A NOTCHED CONFIGURATION, MADE BY THE U.S. BUNTING COMPANY IN LOWELL, MASSACHUSETTS, SIGNED "THROCKMORTON," REFLECTS THE ERA OF COLORADO STATEHOOD, CIRCA 1876-1889

Available: Sold
Frame Size (H x L): Approx. 50" x 78"
Flag Size (H x L): 37.75" x 66"
Description....:
38 star American national flag, press-dyed on wool bunting. The stars are configured in what is known as a "notched" pattern, in which two spaces were left open in anticipation that more Western Territories would soon be added.

Colorado became the 38th state on August 1st, 1876. This was the year of our nation’s 100-year anniversary of independence. Per the Third Flag Act of 1818, stars were not officially added until the 4th of July following a state's addition. For this reason, 37 was the official star count for the American flag in 1876. Flag-making was a competitive venture, however, and few flag-makers would have been continuing to produce 37 star flags when their competitors were making 38’s. It is for this reason that 38 and 13 stars (to represent the original 13 colonies) are more often seen at the Centennial International Exposition, the six-month long World’s Fair held in Philadelphia in honor of the event. Some flag-makers would have been adding a star for the 38th state even before it entered the Union, in the early part of 1876 or even prior. In fact, many makers of parade flags were actually producing 39 star flags, in hopeful anticipation of the addition of two more Western Territories instead of one. But the 39th state would not join the Union for another 13 years, when the Dakota Territory entered as two states (numbers 39 and 40) on the same day, November 2nd, 1889.

The flag is made of three panels of fabric that have been pieced and joined with hand-stitching. The fly end was bound by hand, and there is a twill cotton binding along the hoist, in the form of an open sleeve, also applied by hand-stitching. Near the top, on the obverse, the following text is stenciled in black: “AMERICAN ENSIGN. 5 - FT."

“Ensign” is merely a term for a flag used aboard a ship. The flag was made by the U.S. Bunting Co., in Lowell, Massachusetts and was likely intended for nautical use. Versions of this stencil are seen on other known U.S. Bunting Co. examples, some of which include a April 26th, 1870 patent date. This protected owner, John Holt, with regards to his use of the clamp-dying process in flag production.

The U.S. Navy was in the habit of using 13 star flags on its small boats during the second half of the 19th century, not flags with the full star count, like this one, but there were probably exceptions to that rule. The U.S. Bunting Company was owned in part by Civil War General Benjamin Butler, who had a great deal of both political and military clout and is known to have sought and obtained Naval contracts. At approximately 5.5 feet, the length of the flag would have matched U.S. Navy Regulations for a No. 7 small boat ensign between 1889 and 1912, which encompassed the period when there were 44 states (1890-1896). Though the height of the flag is inaccurate, at approximately 3.2 feet—an odd measurement—it does happen to match 1870-1882 regulations for a No. 13 small boat flag. Regulations do not seem to have been adhered to very strictly. Probably the hoist requirement was ignored by the firm, or by the quartermaster, to get a better price. This was outside wartime, and it is likely that pre-dyed fabric that was on hand, and/or the apparatus to make it, dictated this measurement. Unlike the hoist measurement, which was determined by the width of the stripes, the fly specifications could be easily achieved by clipping the striped fabric at the appropriate length.

When a ship sailed into a foreign port, it would hoist a small, national flag of whatever nation the port belonged to. U.S. Bunting Co., a for-profit and opportunistic maker, would have sold to anyone in need of a flag, including an international audience. The reason for the inclusion of the word “American” on the stencil would have been for quick identification of the flag, among others, within the stores of foreign ships, sailing into American ports.

The fact that there are tack holes along the hoist raises the question of the flag having instead been carried on foot or flown in some manner from a fixed staff. Maritime flags were generally hoisted on ropes. Tacks were not commonly employed in nautical flags, since they rusted and were a poor means of securing fabric in a potentially wet and windswept environment. Of course, these flags may have been designed with one intent, yet sold for whatever need prevailed.

The name "H.H. Throckmorton." is inscribed in pencil on the obverse of the binding, near the bottom. This would have been the name of a former owner and it was particularly common to mark flags for personal ownership, in this fashion, between the 19th and early 20th centuries.

During the period during which this flag was made, lengths of 8 feet and longer were common. At just 5.5 feet in length, the scale is actually very small among its counterparts, made from multiple pieces of fabric for long-term, outdoor use. All-in-all, this is a great example within the 38 star count, with relationships to both Colorado and Massachusetts, with manufacture by an identified maker, with an interesting star pattern, and in a bold, yet manageable scale to frame and display.

Some Notes on the Press-Dying Process:
First patented in 1849, the press-dying process was thought to be a novel idea that would improve flag-making efficiency. In this case, for example, it could potentially alleviate the chore of hand-appliquéing 76 stars (38 on each side). In reality, however, the result must have been less efficient than sewing. To achieve white stars, for example, metal plates in the shape of stars had to be clamped to either side of a length of woolen fabric, in the desired configuration, so they were back-to-back. These may have been lightly brushed beforehand with a solution that would resist dye, or perhaps with a thin coat of wax. The stars were clamped together tightly, the bunting was dyed blue, and the areas where the metal stars were positioned would be left white. For flags with press-dyed stripes, the same task was repeated with different clamps.

A form of resist-dyeing, this method often resulted in crude characteristics, such as stripes with irregular lines, in various widths, and stars with inconsistent shapes, in slightly varying sizes. It is likely that this resulted in some lost product and wasted time, from flags that had bleeding or misprint issues and were of too poor quality to sell. Within those flags that survived, today’s collectors today find the irregularities interesting, not only because they demonstrate early production methods, but also because they lend the sort of folk qualities that make early flags more interesting to look at.

Wool was preferred because it sheds water, making it the fabric of choice for all maritime flags and, in fact, most flags produced by professional flag-makers for long-term outdoor use. Whatever the case may be, printing on wool is costly and difficult. Even today, only about 1% of wool fabric is printed*, because it generally needs to be washed afterward and wool cannot easily be treated with water.

Press-dying was primarily used during the Centennial-era by the U.S. Bunting Company of Lowell, Massachusetts, which began making press-dyed flags for the U.S. military in 1869, and by Horstmann Brothers. The U.S. Bunting Co. was one of the first flag-makers to successfully produce high quality wool bunting fabric in the States, and while its owners worked diligently to master the press-dyeing process, it seems quite obvious today that it was actually more costly than anticipated. This would explain why it never became a popular method of flag production.

* Chen, W., Wang, G., & Bai, Y., “Best for Wool Fabric Printing…,” (Textile Asia, 2002, v.33 (12)), pp. 37-39.

Mounting: The flag was mounted and framed within our own conservation department, which is led by expert trained staff. We take great care in the mounting and preservation of flags and have framed thousands of examples.

The background is 100% cotton twill, black in color. The black-painted, hand-gilded and distressed molding is Italian. The glazing is U.V. protective plexiglass. Feel free to contact us for more details.

Condition: There is minor to modest mothing throughout, including some in the canton and some in the striped field. The most significant of this is comprised of a small hole near the end of the 1st stripe, plus another that bridges between the 1st and the 2nd stripes, and two small holes at the fly end of the 6th stripe. There is minor soiling along the hoist binding and in toward the fly end of the white stripes. Many of my clients prefer early flags to show their age and history of use.
Collector Level: Intermediate-Level Collectors and Special Gifts
Flag Type: Sewn flag
Star Count: 38
Earliest Date of Origin: 1876
Latest Date of Origin: 1889
State/Affiliation: Colorado
War Association: 1866-1890 Indian Wars
Price: SOLD
 

Views: 644